Unexpected Behavior of Diastereomeric Ions in the GasPhase: A Stimulus for Pondering on ee Measurements by ESI-MS

The most common protocols for the quantitative determination of the enantiomeric excess (ee) of raw mixtures by ESI-MS reveal inadequate in cases where the distribution of diastereomeric derivatives diverges from the ee of original solutions. This phenomenon is attributable to a matrix effect, i.e., to the stereospecific formation of high order noncovalent adducts in the ESI droplets, which alters the actual availability of the diastereomeric species under MS analysis. In this frame, the assumption of classic protocols that the ionization correction factor q is independent on the composition of the mixture submitted to analysis is questionable. An alternative methodology is presented in this paper, which is aimed at circumventing the problem by excluding any chemical derivatization of the original raw mixture. It is based on the measurement of the actual distribution of ESI-formed proton-bound diastereomeric complexes from the enantiomeric mixture through a careful analysis of their reaction kinetics with a suitable reactant.      

Determination of phenolic compounds and authentication of PDO Lambrusco wines by HPLC-DAD and chemometric techniques

This work proposes a fast and simple method for detection and quantification of phenolic compounds in PDO Lambrusco wines using HPLC-DAD and chemometric techniques. Samples belonging to three different varieties of Lambrusco (Grasparossa, Salamino and Sorbara) were analyzed to provide a methodology appropriate for routine analysis. Given the high complexity of the sample and the coelution among chromatographic peaks, the use of chemometric techniques to extract the information of the individual eluting compounds was needed. Multivariate curve resolution-alternating least squares (MCR-ALS) allowed the resolution of the chromatographic peaks obtained and the use of this information for the quantification of the phenolic analytes in the presence of interferences. Use of multiset analysis and local rank/selectivity information was proven to be crucial for the correct resolution and quantification of compounds. The quantitative data provided by MCR-ALS about the phenolic targets and additional compounds present in the samples analyzed provided wine composition profiles, which were afterwards used to distinguish among wine varieties. Principal component analysis applied to the wine profiles allowed characterizing the wines according to their varieties.     

Simple Reduction of Heteroaromatic Esters to Alcohols Using a Sodium Borohydride–Methanol System

Some heteroaromatic esters were reduced to the corresponding alcohols by using a sodium borohydride–methanol system. The reduction was completed within 0.15–2.0 h in refluxing THF. The alcohol products were isolated after aqueous workup in moderate to excellent yield (48–97%).     

Protective Properties of Novel S‐Acyl‐Glutathione Thioesters Against Ultraviolet‐induced Oxidative Stress

UV‐induced toxicity is characterized by marked oxidative stress, accompanied by the depletion of key cellular antioxidants, particularly glutathione (GSH). Replenishing cellular GSH may represent a means of counteracting UV‐induced toxicity: however, treatment with free GSH is not therapeutically effective due to its unfavorable pharmacokinetic properties. In this study, we show that S‐acyl‐glutathione (acyl‐SG) derivatives, which consist of an acyl chain (of variable length and saturation) linked via a thioester bond to GSH, increase intracellular levels of reduced GSH in primary skin fibroblasts, adenocarcinoma HeLa and neuroblastoma SH‐SY5Y cells. Consistent with this, acyl‐SG derivatives protect against UV‐induced reactive oxygen species (ROS) production and UV‐B/C‐mediated lipid peroxidation and caspase‐3 activation in the analyzed cell lines, with unsaturated thioesters displaying a significantly greater protective effect. Taken together, our findings suggest that acyl‐SG thioesters may be therapeutically effective in the treatment of UV‐related skin disorders and oxidative stress‐mediated conditions in general.     

Optimization of matrix solid-phase dispersion conditions for UV filters determination in biota samples

A low solvent consumption method for the determination of eight ultraviolet (UV) filters, displaying low to medium polarities, in freeze-dried samples of marine bivalves and fish is proposed. Matrix solid-phase dispersion (MSPD) and gas chromatography with mass spectrometry (GC-MS) were used as sample preparation and determination techniques, respectively. This work describes the influence of several parameters (type and amount of dispersant and clean-up sorbents, as well as elution solvent) on the yield and the selectivity of the MSPD extraction. Under optimized conditions, samples (0.5?g) were ground with 2?g of Florisil in a mortar with a pestle and transferred into a polypropylene syringe, which contained 1?g of C18 as clean-up sorbent. Analytes were eluted with 5?mL of acetonitrile. This extract was concentrated to dryness, re-constituted with 1?mL of ethyl acetate and injected in the GC-MS system without any further clean-up. The global average recoveries, measured for three different biota samples, spiked at three different levels (between 50 and 1000?ng?g^?1), ranged from 80% to 101% with associated standard deviations below 10%. The inter-day precision of the method varied from 4% to 15% and the achieved LOQs (defined for a signal to noise ratio of 10) ranged from 4 to 28?ng?g^?1, referred to the freeze-dried matrix. Octocrylene (OCR) was found in some samples of fish and mussels at concentrations between 15 and 20?ng?g^?1, referred to dry mass.     

Exploiting in vitro and in vivo bioluminescence for the implementation of the three Rs principle (replacement,reduction, and refinement) in drug discovery

Bioluminescence-based analytical tools are suitable for high-throughput and high-content screening assays, finding widespread application in several fields related to the drug discovery process. Cell-based bioluminescence assays, because of their peculiar advantages of predictability, possibility of automation, multiplexing, and miniaturization, seem the most appealing tool for the high demands of the early stages of drug screening. Reporter gene technology and the bioluminescence resonance energy transfer principle are widely used, and receptor binding studies of new agonists/antagonists for a variety of human receptors expressed in different cell lines can be performed. Moreover, bioluminescence can be used for in vitro and in vivo real-time monitoring of pathophysiological processes within living cells and small animals. New luciferases and substrates have recently arrived on the market, further expanding the spectrum of applications. A new generation of probes are also emerging that promise to revolutionize the preclinical imaging market. This formidable toolbox is demonstrated to facilitate the implementation of the three Rs principle in the early drug discovery process, in compliance with ethical and responsible research to reduce cost and improve the reliability and predictability of results.     

A flow-through microfluidic chip for continuous dielectrophoretic separation of viable and non-viable human T-cells

Effective methods for rapid sorting of cells according to their viability are critical in T cells based therapies to prevent any risk to patients. In this context, we present a novel microfluidic device that continuously separates viable and non-viable T-cells according to their dielectric properties. A dielectrophoresis (DEP) force is generated by an array of castellated microelectrodes embedded into a microfluidic channel with a single inlet and two outlets; cells subjected to positive DEP forces are drawn toward the electrodes array and leave from the top outlet, those subjected to negative DEP forces are repelled away from the electrodes and leave from the bottom outlet. Computational fluid dynamics is used to predict the device separation efficacy, according to the applied alternative current (AC) frequency, at which the cells move from/to a negative/positive DEP region and the ionic strength of the suspension medium. The model is used to support the design of the operational conditions, confirming a separation efficiency, in terms of purity, of 96% under an applied AC frequency of 1.5 × 10⁶ Hz and a flow rate of 20 μl/h. This work represents the first example of effective continuous sorting of viable and non-viable human T-cells in a single-inlet microfluidic chip, paving the way for lab-on-a-chip applications at the point of need.     

Fabrication of a Simple and Cheap Screen-printed Silver/Silver Chloride (Ag/AgCl) Quasi-reference Electrode

In this work, a silver/silver chloride ink is fabricated using two steps. First the silver ink is prepare using silver, nail polish and acetone. Then the silver ink is painted in a paper substrate and a silver chloride layer is deposited using a bleach solution. The result is the silver/silver chloride conductive ink. The silver ink is cheap ($2.49/g), well-dispersive and very easy to fabricate. The materials were characterized by SEM and XRD. The Ag ink showed the formation of a continuous network throughout the silver ink film with fewer agglomeration. The effective chlorination process was also observed in the Ag/AgCl characterization. Since the Ag/AgCl substrate will be used as a quasi-reference electrode, it is important to investigate the electrical properties. The Ag ink showed an average ohmic resistance of 2.27 Ω. The addition of the AgCl layer decreases the conductivity, as expected. In summary, the Ag/Ag/Cl ink developed is simple, well-dispersed, cheap and with good conductivity. Therefore, it can be used as a conductive ink in the fabrication of quasi-reference electrodes.